SubMac guide · Updated 19 November 2026
How many boxes of flooring do I need?
Add the area of each room, add a waste allowance for cuts, then divide by the coverage printed on one box and round up. Keep the measurements, waste percentage and box coverage together so you can explain the number later.
Measure the rooms first
Start with the rooms you are flooring. For a rectangular room, multiply the length by the width. For an L-shaped room, split it into two rectangles, measure each one and add the areas. Write every measurement down as you go so you can check the figure later.
Use the same unit throughout. If the box coverage is in square metres, measure in metres. If it is in square feet, measure in feet. Mixing units is the most common reason a flooring order is wrong.
Do not subtract fixed units such as kitchen islands unless you are certain they will not be moved or replaced. A little extra material is cheaper than a second order in a different dye batch.
Understand box coverage
Coverage is the area one box will cover, not the number of plans or boards it contains. It varies by product, by plank width and by the pattern you choose. Always take the figure from the product you are actually buying.
If you have not chosen a product yet, use a representative figure as a working assumption and mark it clearly. When the product is chosen, replace the assumption and recalculate before ordering.
The SubMac flooring calculator takes a coverage figure per box and works out the number of boxes for you, including the rounding up that a manual calculation often misses.
Choose a waste allowance
Waste covers cuts around the edge, doorways, corners and any mistakes. A simple rectangular room laid in a straight pattern needs less than a diagonal layout or a room with many alcoves.
A common starting point is around ten percent, but treat that as an assumption rather than a rule. If you are laying a patterned floor or working in an awkward room, increase it and write down why.
Keep the allowance visible in the calculation. It is much easier to discuss a clearly labelled allowance with a client or a supplier than a number that appears from nowhere.
Worked example
Imagine a room 4 metres by 5 metres, giving 20 square metres. Add ten percent waste and you have 22 square metres. If each box covers 2 square metres, divide 22 by 2 to get 11 boxes.
If a box costs $18, the material comes to $198. Those four numbers — area, waste, coverage and price — are the whole calculation, and each one can be changed without redoing the others.
Use the example to check the method, then replace every figure with your own measurements before you order anything.
Different flooring types
Laminate and vinyl are usually sold by the box with a clear coverage figure. Wood may be sold by the pack with different lengths mixed, so check whether the coverage is an average. Carpet is often sold by the linear metre from a roll of fixed width.
For roll goods, divide the area by the roll width to get the length required, then add waste. Ask the supplier whether they have a minimum cut length and whether the price includes fitting underlay.
Keep each flooring type as a separate calculation if a project uses more than one. Mixing them into one total hides the assumptions that matter for each product.
Patterns and direction
A straight layout parallel to the longest wall is usually the most economical. A diagonal layout or a herringbone pattern produces more offcuts, so the waste allowance should reflect that.
If rooms are being laid in the same direction through doorways, plan the layout across the whole area rather than room by room. That can reduce the number of cuts and make the floor look continuous.
Write the chosen pattern next to the waste figure in your notes. If someone else checks the order later, they will understand why the allowance is what it is.
Underlay and trims
Underlay, thresholds and skirting are usually priced separately from the flooring itself. Add them as their own lines so the total cost is honest and the client can see what is included.
Check whether the flooring already has underlay attached. Some laminate does, and buying more separately wastes money. The product description will say so.
Door thresholds and expansion gaps affect the finish more than the box count, but they are worth noting on the quote so there is no disagreement at the end of the job.
Ordering and delivery
Round up to whole boxes and check whether the supplier has a minimum order. A few extra boxes are useful for future repairs, especially if the product may be discontinued.
Ask about delivery access and where the boxes can be stored. Flooring needs to acclimatise in some cases, and a delivery you cannot move into the building is not a saving.
Keep the delivery note and the product batch number. If a later box looks different, those details make it much easier to resolve.
From estimate to quote
Once the material cost is clear, add labour and any preparation as separate lines. A quote with visible line items is easier for a client to approve than a single number.
The flooring calculator has a 'Turn this into a quote' button that carries the line items across to the quotation generator. Set a validity date, because product prices change.
Read the guide on writing a quote that wins the job for scope, terms and follow-up.
Common mistakes
Forgetting the waste allowance is the first. The second is using the number of boards in a box rather than the coverage. The third is measuring in feet while the supplier quotes in square metres.
Another common mistake is ordering for each room separately without checking the total. Rounding up several times can buy more material than a single combined order.
Finally, do not assume every room is a perfect rectangle. A quick sketch with the real measurements takes a minute and prevents most ordering errors.
Checking the answer
Before ordering, run the calculation a second time from scratch. If the two answers differ, check the units, the room measurements and the coverage figure in that order.
Compare the result with a rough mental estimate. If a small room appears to need hundreds of boxes, something is wrong with the units. If a large room needs two boxes, the area is probably too small.
Keep the written assumptions with the quote. They are useful if the client asks why the allowance is higher than expected or if you need to revise the price later.
Frequently asked questions
How much waste should I add?
It depends on the room and the pattern. Around ten percent is a common starting assumption.
Should I round up boxes?
Yes. You cannot buy part of a box.
Can I use feet and inches?
Yes. Switch the calculator to imperial.
Does this include fitting?
No. Add labour as a separate line.
What if the product changes?
Recalculate using the new coverage before ordering.
Free tools
Doing this for clients? The Contractor Paperwork Kit has ready-to-use quote and invoice templates. One-time $19.