SubMac guide ยท Updated 18 November 2026
How much does it cost to tile a bathroom?
The cost of tiling a bathroom depends on the area, the tile you choose, the condition of the floor or wall, and whether you are paying for labour. Measure the space in square metres, add a waste allowance for cuts, then price tiles, adhesive, grout and any preparation. A calculator keeps the arithmetic visible.
Start with the area, not the price
Measure the floor and each wall you intend to tile. For a rectangle, multiply the length by the width; for an awkward room, split it into rectangles and add them together. Keep the measurements in one unit and write them down as you go, because it is easy to forget which wall you already counted.
Decide whether to subtract doorways, drains or fixed fittings. Most tilers price the space they actually cover, but a small allowance for cuts is sensible either way. If you are replacing existing tiles, measure the old area and add any extra you want to cover.
Once you have the area, the rest of the estimate becomes simpler. Every quantity that follows, from tiles to adhesive to labour, is based on that number.
How much waste should you allow?
Waste is the extra material needed for cuts, corners and mistakes. A simple square room with straight tiles can use a small allowance; a bathroom with several corners, a niche or a diagonal pattern needs more.
Write the allowance down as a percentage and apply it to the area before you work out boxes. Keeping it as a separate, visible line means you can change it later without recalculating everything from scratch.
If you are using a rare tile or a discontinued line, buy a little extra for future repairs. A spare box is much cheaper than trying to match a batch years later.
Tiles, adhesive and grout
Tile prices are usually quoted per square metre or per box. Check the coverage stated on the box and use that figure rather than assuming how many tiles it contains. Divide your area including waste by the box coverage and round up.
Adhesive and grout are priced by coverage too. The manufacturer's figure is the best guide because it depends on the tile size and the thickness of the bed. Add a little extra for first-time work, where a tile may need to be lifted and relaid.
Do not forget preparation. A level, sound surface costs less to tile than one that needs repair. If the subfloor moves or the wall is out of square, that work should be priced before the tiles.
Labour and what it includes
Labour is often the largest part of the total. It may be quoted per day or per square metre, and the rate changes with the difficulty of the work. Small rooms, many cuts and detailed patterns take longer than a large open floor.
Ask what the labour quote includes: removal of old tiles, making good the surface, waterproofing where needed, grouting, sealing and cleanup. A lower price that leaves you with a skip to hire is not necessarily cheaper.
If you are doing the work yourself, value your time honestly. The calculator gives you materials; a separate line for your own hours makes the real cost clear.
A worked example you can adapt
Imagine a bathroom floor of 4 square metres with 10% waste. That is 4.4 square metres to cover. If a box covers 2 square metres, you need three boxes. At $25 a box, tiles cost $75.
Add adhesive, grout and any preparation, then add labour if you are hiring someone. The point of the example is the method: measure, allow for waste, divide by coverage, round up, then price the other items.
Use the SubMac tile calculator to do the arithmetic in your browser. Change the dimensions, the tile size, the waste allowance and the price per box until the numbers match your plans.
Common surprises
The most common surprise is finding that the walls are not square or the floor is not level. That adds preparation time and sometimes materials. The second is ordering too few boxes and discovering that the next batch looks slightly different.
A third is forgetting the small items: spacers, sealant, a notched trowel or a new floor waste. They are individually cheap but easy to overlook in a quick total.
Finally, check access. If the work is in an upstairs bathroom with a narrow stairwell, delivery and waste removal may cost more than expected.
From estimate to quote
When the numbers are right, turn them into a quote before you start. A quote sets out the scope, the price and the assumptions, so everyone agrees what is included.
SubMac's tile calculator has a 'Turn this into a quote' button that carries the line items across to the quotation generator. Add your labour as a separate line and set a validity date.
Read the guide on writing a quote that wins the job for the rest of the process.
Choosing the tile size and layout
Larger tiles often cost more per square metre but can be quicker to lay, which changes the labour figure. Smaller tiles are easier to handle in a small bathroom and create less waste around corners, but they take longer to set. Compare the whole job rather than the price of a single box.
A straight grid is the simplest layout and produces the least waste. A brick pattern, a diagonal layout or a feature wall needs more cuts and more time. If you want a pattern, add a little extra to both the waste allowance and the labour line.
Check the tiles are suitable for the surface. A tile rated for a wall may not be suitable for a floor, and a bathroom floor needs a surface with adequate slip resistance. Choosing the right product first avoids replacing it later.
Waterproofing and wet rooms
In a wet room or a shower area, water has to be kept out of the structure. That usually means a waterproof membrane or a suitable board behind the tiles, with careful sealing at joints, corners and penetrations. It is a separate trade in some places and a separate line in the quote.
Skipping this work to save money is a false economy. Water damage appears slowly and costs far more to repair than a membrane costs to install. If you are unsure what is required, ask a qualified installer and follow local building rules.
The SubMac calculator does not price waterproofing. Add it as its own line when you build the quote, with a clear description of what is included, so the customer can see it has not been forgotten.
Floor versus wall tiling
Floor tiling and wall tiling are priced differently. A floor has to carry weight and resist wear, so the tile, the adhesive and the preparation all have to suit that use. A wall is lighter work, but it is still awkward around fittings and corners.
Measure them separately. If you use the tile calculator, add each surface as its own row with its own dimensions. That way you can change one without disturbing the other, and the quote can show the two areas clearly.
If the same tile is used on both, check the total number of boxes once rather than ordering separately for each surface. Rounding up twice can buy an unnecessary extra box.
Getting several quotes
Ask at least three installers for a quote using the same specification: the same tile, the same area, the same preparation and the same pattern. Otherwise you are comparing different jobs and the lowest number will not be the best value.
Check what each quote excludes. Removal of old tiles, waterproofing, making good the walls and cleaning up are common omissions. A quote that lists these explicitly is easier to compare and easier to accept.
Finally, ask about timing. A good installer may be busy, and a rushed job near a holiday is rarely the cheapest outcome. Agree a start date and a realistic duration before you commit.
Frequently asked questions
How do I measure an awkward bathroom?
Split the floor into rectangles, measure each one and add the areas together.
Is waste really necessary?
Yes. Cuts, corners and mistakes all use tiles that cannot be reused.
Should I subtract the toilet and basin?
Only if you are not tiling under or around them; otherwise measure the full area.
Can I use feet and inches?
Yes. Switch the tile calculator to imperial and convert the values.
Does the calculator include labour?
No. Add labour as a separate line when you build the quote.
Free tools
Doing this for clients? The Contractor Paperwork Kit has ready-to-use quote, invoice and receipt templates. One-time $19.