SubMac

SubMac guide ยท Updated 18 November 2026

Markup vs margin for contractors?

Margin is profit as a share of the price you charge; markup is profit as a share of the cost. A 50% markup produces a 33% margin, not 50%. Use margin to understand profit and markup when building a price from a cost, and always say which one you mean.

Two words, two different numbers

If a job costs you $400 and you charge $600, your profit is $200. That $200 is 50% of the cost, so the markup is 50%. It is 33.33% of the price, so the margin is 33.33%. Both statements are true; they simply use different denominators.

Confusing the two is one of the easiest ways to underprice work. A contractor who aims for a 30% margin but adds 30% to cost will earn about 23% margin, not 30%. Over a year, the difference is significant.

The fix is simple: write down which figure you are using every time you price a job, and use the same definition in your quotes, your spreadsheet and your conversations.

When to use each one

Markup is practical when you build a price from a known cost. If a job uses $1,000 of materials and you want a 40% markup, you can calculate the price quickly. Builders and trades often work this way because supplier quotes arrive as costs.

Margin is better for understanding the business. Your income, costs, tax and profit all appear in your accounts as shares of revenue. If you want to know how much of every dollar earned is left after costs, you are asking about margin.

Use both: markup to build the number, margin to check that the number is enough.

Worked example: from cost to price

Suppose materials and direct labour cost $2,000 and you apply a 25% markup. The price is $2,500. Profit is $500, and the margin is $500 divided by $2,500, which is 20%.

Now turn it around. If you need a 25% margin, the price is the cost divided by 0.75, which is $2,666.67. The markup needed to reach that price is 33.33%, not 25%.

The SubMac profit margin calculator does both conversions and shows a markup-to-margin table so you can check the relationship at a glance.

Where tax and overheads fit

Neither margin nor markup includes tax by itself. Work out your price from costs and profit first, then apply the sales tax that applies where you trade. Keep the tax line separate on the quote and the invoice.

Overheads are different. If your cost figure only includes materials and direct labour, your margin must also cover van costs, insurance, tools, administration and quiet periods. Either include an overhead allowance in the cost or choose a margin large enough to absorb it.

This is why two contractors using the same markup can have very different outcomes: one has accounted for overheads and the other has not.

A simple table to keep handy

A 10% markup is about 9.09% margin. A 20% markup is 16.67% margin. A 25% markup is 20% margin. A 50% markup is 33.33% margin. A 100% markup is 50% margin.

The pattern is worth remembering: margin is always lower than markup for the same job, because the price is larger than the cost. The gap grows as the markup grows.

Keep the table next to your pricing worksheet. It makes it much harder to promise a margin you have not actually priced.

Talking about it with customers

Most customers do not need a lesson in the terminology. They want to know the price and what it includes. Use plain language on the quote: a total, a list of what is included and a clear validity date.

Internally, keep the distinction strict. Write 'markup 30%' or 'margin 30%' rather than just '30%'. A single word can change the price by hundreds of dollars on a larger job.

If a customer asks how you arrived at the price, show the line items and the assumptions rather than the percentage. Visible arithmetic builds more trust than a hidden formula.

Turning the calculation into a quote

Once the price is set, use the quotation generator to present it. Add the line items, any deposit and a validity date, then download a clean PDF.

If you are also working out what to charge per hour, the hourly rate calculator starts from your target income, billable hours, costs, tax and margin and gives you a rate to check against the quote.

Read the guide on writing a quote that wins the job for scope, terms and follow-up.

Pricing materials and labour separately

A single percentage applied to everything hides useful information. Materials, labour and subcontracted work usually carry different margins, and treating them alike can push one part of the job too high and another too low.

Price materials with a markup that reflects the risk of handling, storage and waste. Price labour using the hourly rate you calculated from your target income and billable hours. Add subcontracted work at the quoted cost plus an allowance for coordination.

When the lines are separate, you can see which part of the job is underpriced. You can also explain a change to the customer without reopening the whole quote.

A checklist before you send a quote

Check that every cost is included: materials, labour, consumables, delivery, waste removal and any permit or inspection fee. Add an allowance for the work you know is likely but cannot yet define.

Check that your markup produces the margin you actually need after overheads. A job that looks profitable at 30% markup can still lose money if the van, insurance and admin were never in the cost.

Check the validity date and the payment terms. Material prices move, and a quote that can be accepted months later is a risk you are taking for free.

How to raise your prices

Start with the numbers, not a feeling. Recalculate your hourly rate using current costs and realistic billable hours, then apply the margin you need. If the new price is higher than the old one, the increase is justified rather than arbitrary.

Introduce the change on new quotes rather than trying to reprice work already agreed. Give existing customers notice if a recurring job is affected, and explain it in one calm sentence: costs have changed, so the rate has changed.

Expect a few objections. A customer who leaves over a justified increase was likely to be difficult at the old price too. A pricing playbook can help with wording, but keep it plain and factual.

Common mistakes with percentages

The first is adding 30% to cost and calling it a 30% margin. It is not. The second is applying a markup after tax, which changes the final amount and can confuse the customer.

The third is mixing margin and markup in the same spreadsheet. Pick one convention for each sheet and label every column. A column called profit should say whether it is a share of cost or of price.

The fourth is forgetting that a discount comes out of profit. If you reduce the price after building it from a cost, recalculate the margin. A small discount can erase most of the profit on a tightly priced job.

Frequently asked questions

Is a 50% markup the same as a 50% margin?

No. A 50% markup gives a 33.33% margin.

Which should I use when pricing?

Markup to build from a cost; margin to check the profit you actually make.

Does margin include tax?

No. Calculate the price first, then apply tax separately.

What margin should a contractor aim for?

It depends on overheads and the work; work out your costs first and choose a margin that covers them.

Can the calculator do both conversions?

Yes. It accepts a price, a target margin or a markup and shows the other figures.

Free tools

Doing this for clients? The Contractor Paperwork Kit has ready-to-use quote, invoice and receipt templates. One-time $19.

Sources